Posts Tagged ‘renovation’

Keys To A Successful Home Renovation Project

Posted:10 April, 2009 by admin

Contemplating some home improvements? Whether it is a small project or a major renovation there are two primary keys to success:

1.Planning: Have you considered what disruption the project will have on you and your family?s day to day ability to function? As an example, laying some ceramic tile on the bathroom floor may take the bathroom out of service for two days. In a one bathroom home this could prove to be a major obstacle to any bathroom renovation. Kitchen renovation can also cause complexities if major appliances have to be temporarily moved, besides the necessity to make sure floor surfaces are not damaged while providing a temporary relocation, refrigerators need to be powered. Even a small project such as repainting a room can create major inconveniences because of furniture relocation and paint odors.

Always make a list of material and tools that you will require, before starting the project. Then make sure you know where the tools and material (the material that you believe you already have is) are, collect them, verify that they are useable and then place them all in a convenient location so that you can find them when you need them.

2.Knowledge: Whether you are going to do the project yourself or hire a contractor, knowledge is the second key to ensuring that the job will be completed to your satisfaction. Invest some time in learning about the materials that you are going to use and the tools needed to install them. Believe it or not the manufacturers of the materials and products that you are going to use know more about them than you do. If a manufacturer says allow the adhesive to cure for 24 hours before applying the grout, don?t apply the grout in 12 hours. If a manufacturer says that his flooring needs to acclimatize in your home for 72 hours before installation, don?t bring it home and immediately start installing it.

If you are hiring a contractor you must check his references and you must understand what material he is intending on using. There are vast differences in quality levels of materials. If a contractor says he will install an oak plank hardwood floor, there are many questions to ask about the grade, dimensions and finish of the material. Prices can vary from $2.00 to $15.00 a sq. ft.

Proper planning and knowledge will make a big difference in the overall success and satisfaction with your next home improvement or renovation project.

For additional information on all the aspects of home renovation visit Renovation Headquarters.

Easy Ways To Increase Your House’s Value

Posted:8 April, 2009 by admin

Before getting your house valuated think about the list below and if you should implement them to increase your house’s value.

Clean up your house:
Clean your house thoroughly. By this I mean do everything humanly possible to cleanse your house. Clean the windows, the sink, vacuum the floor, scrub the toilet, take out the trash, make sure nothing appears to be in a sloppy mess.

Fix what can be seen before what can’t:
Quite a few people believe that its important to work on the things you can see before the things you can’t, this attracts more buyers. For example renovate the exterior before the interior before the creaky floor boards. If the house looks like a dump from the outside most people will not be willing to have a look around inside.

Seal the driveway:
Do you have a gravel driveway? Do weeds pop up, do you find yourself constantly raking gravel, do find that gravel manages to get into your house, do you get irritated by the loud noise of a car that’s driving on it makes? It may be time to end these problems and increase your houses value by sealing your driveway.

Is the property secure?
People will tend to pay more for a house they feel safe in, so consider;

- Installing a burglar alarm

- Installing a fire alarm

- Installing security doors

- Installing secure and reliable locks

Do you need new spouting?
Spouting will be one of the first things an appraiser or buyer will notice when they look at your house. You do not want them to see rusted, dirty, broken spouting. Putting in new spouting will increase the value of your house and decrease the maintenance required.

Are your windows up to scratch?
Windows are a powerful tool in your home improvement arsenal. If your windows are not aesthetically appealing or are in an awful state consider double-glazed windows, although possibly a bit expensive, are a good improvement. They will provide your house with superior heat insulation and sound insulation. If a room isn’t getting much light, consider enlarging the windows or putting in new ones. This will make the room a lot warmer and, light and bright which appraisers and buyer love.

Does the house need a power wash?
Unless you regularly clean your house with a scrubbing brush it will probably be a good idea to get your house power washed. Being inexpensive, this will help get rid of the grime, dirt, and any other disgusting build up on your house.

Temperature:
Curtains and windows will help with insulation but to really insulate your property you need to have a good insulator between walls such as fibreglass or foam. People will happily pay much more to be warm throughout the winter than spend the extra money on heating, so by doing this the value of your house can increase substantially.

If excess heat is an issue then consider installing an air conditioner. Again, people will always pay extra to feel comfortable.

Roofing:
Going back to the idea of fix what can be seen before what can’t, a roof improvement can be very beneficial to the value of your house. Firstly the roof needs to be cleaned, preferably power washed. If the roof is in that bad of a shape maybe a re-tiling is in order.

Things to think about before an open day.

-Make sure you have a plan and know what your doing on the day. Assign jobs to all family members or flat mates to get things done quicker in case there is a showing scheduled with short notice.

-Make sure everything smells nice and fresh, if you smoke do not smoke in your house for a few days before the auction. Open all the windows, use an air fresher if you have to.

-Get rid of all your pets for the day. They can be a nuisance especially if they are over friendly and may cause some allergic reactions.

-Your house should have a light and sunny atmosphere. Pull back all the curtains and blinds, turn lights if its dark or rainy.

-If you have the luxury of controlling the temperature of your house make sure the temperature is comfortable for all your guest.

-Clean your house thoroughly. By this I mean do everything humanly possible to cleanse your house. Clean the windows, the sink, vacuum the floor, scrub the toilet, take out the trash, make sure nothing appears to be in a sloppy mess.

-Leave the open home unless your do not have a real estate agent there. If you have to stay, don’t let the buyers know your the seller and don’t approach or smother them unless they come to you. Try to stay out of their way.

This article is owned by http://www.use-your-equity.com and written by John Whiteside. Learn more about real estate investing, and how to create and use the equity in your home! The original article can be found at http://www.use-your-equity.com/General.html

How To Install A New Toilet In 5 Easy Steps

Posted:10 February, 2009 by admin

If your toilet is old and in need of repairs, it is cheaper to replace it by installing a new one. This is quite easy to do and can be completed in an afternoon. However, if you plan to install a toilet in a new location, you will have to extend supply pipes and drainpipes to the desired spot, a job you may want to leave to a plumbing contractor.

Most toilets are sold with the necessary gaskets, washers, and hardware for fitting the tank to the bowl. However you might need to buy a few parts. Here is a list of what you need to complete this task:

Parts: Toilet bowl, Toilet tank, Toilet seat, Two 1/4 bolts for bowl to flange, Wax ring, 20 water supply with fitting at valve or floor connection and Tools: Pair of channel pliers, bucket, screw driver.

(Many of these can be ordered online at any DIY website such as DIY Tips UK: http://www.diy-tips-uk.com/plumbing/)

1. Shut off the water to the toilet, use a bucket and a cloth or a sponge to remove the water left in tank and bowl after you flush the toilet.

2. Using a pair of channel pliers, or a small pipe wrench (8), remove the nut where the water line fastens to the ballcock valve under the left side of the bottom of the tank. Next use a small crescent wrench, remove the two 1/4 nuts holding the bowl to the floor flange. Remove old toilet. Remove the water line from the valve or fitting at floor or wall.

3. Now you are ready to install your new toilet. Put the two 1/4 bolts in the side holes of the flange with the bolt head in the flange. Put some of the old wax at this spot to hold the bolts straight up and across from each other. Put new wax ring on flange, flat side up if tapered.

4. Set new bowl only straight down so it centers on wax ring and both bolts come through holds on each side of bowl. Sit on bowl facing wall until your weight puts bowl flush with the floor. Put metal washers and nuts on bolts and tighten until snug. Do not over-tighten as you can crack the bowl. Tighten these again after toilet is completely installed and filled with water.

5. Next put 2 rubber gasket on tank where it sets on the bowl, put rubber washers on bolts provided under the bolt head so they will be on the inside of the tank. Pick up tank and set on bowl over holes in bowl where bolts go through. Sit on bowl facing wall. Put bolts on from the inside of the tank into holes in bowl, put on metal washers and nuts and tighten. Hold tank level and tighten so it brings tank down level. Use a large screw driver inside tank and a crescent wrench or end wrench to back up nut under bowl. Tighten with screw driver. Hook water supply to tank, turn on water, check for leaks, and snug up the bolts holding bowl to floor. If there is a space between the back of the tank and the wall, put a spacer of sort there to brace tank. A piece of wood or hard rubber works fine.

Maintenance:

At least twice a year clean out the inside of your toilet tank. When cleaning the toilet tank, turn off the water, flush toilet once, add small amount of cleaning detergent inside tank to water remaining and use a cloth or brush to clean. Also clean out holes under toilet seat and rim of the bowl as well as the 3/4 hole in the bottom of toilet bowl. Replace rubber tank ball at this time if needed. Maintaining your new toilet will keep the plumber away and reduce your plumbing bill.

Copyright ? 2005. Bridget Mwape writes for DIY Tips UK: http://www.diy-tips-uk.com/ which features how-to articles and products to help you with your DIY and home improvement projects. This article may be reprinted as long as all the above links are active and clickable and this author box (byline) is not edited.

Tearing Down The House

Posted:7 February, 2009 by admin

Last year, we bought this big ol’ 1887 house. We are just now coming to grips with the magnitude of the upgrades planned.

With a baby on the way and Little Lady all of two years old burning calories faster than pillagers burn the Amazon rainforest, how tough can upgrades really be?

Ever since we bought the house, my wife has been urging me to tear that thing down.

That thing, at the foot of our lane, had been a shelter to keep kids dry while waiting for the school bus. It had seen better days. Like when paint could still be seen on the wood. Like when it stood upright ? taller even than the weeds! ? before gravity won the battle.

That thing was our very own Roman ruins … minus the Roman part, of course. So I finally tore it down.

What? my wife asked. You tore it down?

Yup.

But how will people find us, now?

We had used that thing as a marker, even a beacon. Turn right on County Road 7, and just keep going until you see the eyesore. You can’t miss it. That’s us.

Houses grow and age just like people. Sometimes the old gets in the way of the new. Sometimes you have to rip things apart to build them up.

Recently, I was ripping apart a couple walls of the soon-to-be nursery. I assured my wife it would be a two- to four-hour job. To avoid inhaling an overdose of plaster dust, she and Little Lady escaped to exile at Grandma’s for the afternoon.

Twelve hours later …

The clock ticked past midnight before those two to four hours showed me mercy. Little Lady and her pregnant mom wisely chose to remain in exile overnight. Instead of resting my weary muscles, I had a jungle of ? hack, hack - plaster dust nearly a foot deep to dispose of. Beach party, anyone?

If tearing it all down took so long, how many hours will it take to put up the new walls, including the wall overlooking the staircase? (Did I mention I’m afraid of heights?)

How long will it take to cut and place the trim (baseboards, casing, crown molding, and a new window sill ? I broke the old one trying to pry loose a lathe strip)?

How long will it take to hang a new door? To sand the old floor? To clean up the big mess? To lift the wallboard to the second floor? To return to the store for more nails or to replace lumber I wreck or to pick up a few dozen items I forget? To replaster the corners I plaster wrong the first time (and the second and the third and …)?

I sat my wife down for a heart-to-heart. Honey, we have a business to run, a toddler to nurture, family members to help, a house to clean on occasion, and a jungle that will need mowing one of these days. We need ductwork to thaw our bedroom this winter, the foundation needs crack-filling and this nursery would take Hercules many long days of hard labor to complete. I don’t know if we can find time for all this before the baby is born.

Maybe we should put something off, my wife suggested.

Great idea! I said, looking at my agenda. Now, let’s see. How long do you want to delay the delivery?

I ducked just in time.

The easiest thing to reschedule turned out to be my sleep. Right now I have a house to upgrade. There’ll be plenty of time for sleep next year. That is, if I don’t grow too old in the meantime and need to be torn down myself.

About The Author

The author is David Leonhardt, The Happy Guy. To receive his column weekly in your inbox, sign up at http://TheHappyGuy.com/positive-thinking-free-ezine.html.

Visit his home page at http://TheHappyGuy.com.

Info@thehappyguy.com

Do I Really Need A Contractor?

Posted:29 January, 2009 by admin

You need to paint the house. Maybe install a new bathroom sink. Or it?s time to replace the inflatable pool sitting in the backyard with a kidney-shaped inground pool. But what you need to ask yourself is? do I take on the project myself?

Well, it all depends. To answer this question, you?ll need to ask three more questions:

?Do I have the money?

?Do I have the time?

?Do I have the skills?

Do I have the money?

A big factor in any home improvement or repair is whether or not you can afford to hire a professional to do the work or, at least, help with the job. Paying for labor can add to the cost of any project, sometimes doubling it. Right? Like the answer to so many questions ? it depends?

It?s possible you might have to spend even more money by not hiring a contractor or subcontractor. If you do a project yourself, you might have to buy or rent tools to get the job done. And you could spend a lot more buying building materials. Many contractors get special deals for buying in bulk or have built up relationships with many suppliers. You might be paying retail while your contractor is buying wholesale. Finally, if your skill level is not up to par, and you have to pay a contractor to come out and fix your mistakes, your costs could shoot through the roof (that you just tried to replace!)

Always consider money when taking on a remodeling or do-it-yourself project. Without access to proper tools, special discounts, or how-to knowledge, you might need a pro to come in and do the job. If it?s a simple project and you have the tools and the skills, then hiring someone else to do it could be the wrong move.

Unless?

Do I have the time?

You always must consider how much time will be involved to finish your construction project. Replacing a faucet might only take you a few hours if you have the tools and talent. But if you?re going to tackle a larger task, factor in how much of your time it will take up. And not just the time you?ll spend actually working on it but the time it will take to find the right price, shop for any special tools and for the materials, and to clean up after your job is done.

Whatever project you have in mind, try to estimate how much time it will take to complete. Once you?ve got your time estimate in hand? double it. Well, not always but unexpected problems always seem to creep up on your that add delays. Many ?weekend warriors? will start a simple bathroom remodel that should only take three days. If an unseen problem occurs, the completion date could get pushed to the following weekend. Imagine if this happens and it?s the only bathroom in the house?

If you?re short on time, it might be a good idea to bring in an expert to handle the workload. If you have too much time on your hands? I could use help installing a ceiling fan.

Do I have the skills?

If you ask anyone who drives a car whether or not they are a good driver, nearly every person will tell you they?re the best driver in the world. They can?t all be right because I nearly got run off the road twelve times yesterday. Some people don?t know they?re the bad driver that everyone complains about. Many people also think they?re exceptionally skilled with tools. ?Good with their hands,? they?ll tell you.

It?s a good idea to make an honest assessment of your skill level before beginning any new remodeling project.

The danger of watching too many ?home improvement? shows is that the hosts always make it look so easy. They edit it down till each project looks clean and simple and only takes a half hour to complete (with commercials!)

If you are putting new tiles on your shower walls or installing a new backsplash in your kitchen you could be working with expensive materials. A trial-and-error approach or learning on-the-job could really increase your costs.

It might be best to pat yourself on the back, congratulate your ability to find a service like www.ConstructionDeal.com to locate the right professional for the job.

Are there alternatives?

Sure, there are always alternatives. You can do it all yourself, you can bring in a contracting pro for the entire project, or you can do some of the ?dirty work? yourself. To save on the amount of money you have to pay someone else and to save on the amount of time others will be tramping through your home, you could do a lot of the prep work on your own.

For example, if you?re hiring professional painters to paint your house, you could scrape and sand a lot of the paint before they ever get there. Or, if you?re adding a new room to the home, you could handle the cleanup yourself after the project is completed. There are a number of ways to do this ?grunt work? to save time and money on the project while still bringing in an expert to do the job right? when it really counts.

A final thing to keep in mind, when doing it yourself ? be careful to not void any warranties on labor or products that you own by working on them. If they?re covered, let someone else handle it.

Whether you do-it-yourself or you do-some-of-it-yourself, make sure you think about everything involved in the project. Asking yourself these questions, and answering honestly, could save you time, money, and maybe even a few fingers? those jig saws can be tricky to operate.

Timothy K. Clark is the Director of Marketing for ConstructionDeal.com, a valuable website that matches Contractors with Property Owners for residential and commercial improvement, remodeling and repair projects. For more information, visit http://www.constructiondeal.com or call 866-663-47111.

Checking A Contractor’s References

Posted:30 December, 2008 by admin

Whenever you’re hiring a company for any home improvement work, you should always check their references. Get names and phone numbers (the Contractor should be proud of any past work and happy to give the information) and call them.

Calling another homeowner out of the blue can be hard to do, but armed with the right questions it can be relatively painless. Since you’re probably going to be spending thousands of dollars on this contractor and you’re going to have that person in your home for several weeks (or months), it’s important to know who you’re dealing with.

When you contact the contractor’s references, always ask — at least — these four questions:

1) Did the Contractor stay on schedule and follow the terms of your contract?

2) Did the Contractor listen to your concerns, respond to problems, and seem concerned about resolving the issues?

3) Were you pleased with the work and were you pleased with how it got done? (okay, so it’s two questions!)

4) Did the Contractor make all the necessary corrections to any problems?

By making sure the contractor has the skills to do your job right, you’ll have a much happier home renovation experience. And you can avoid being one of those remodeling horror stories that you’re always hearing about.

Timothy K. Clark is the Director of Marketing for ConstructionDeal.com, a valuable website that matches Contractors with Property Owners for residential and commercial improvement, remodeling and repair projects. For more information, visit http://www.constructiondeal.com or call 866-663-4711

Redesign Your Home Into Your Dream Home

Posted:19 December, 2008 by admin

What could you do with $150,000? You could buy a small, modest home in some communities. You could sell your home and move to a larger home. Or you could redesign and personalize your current home so that, although it will appear average on the outside, looking undistinguished from the neighbours?, there is absolutely nothing average about the interior once the work is complete.

Exactly what sort of project are we talking about? Interior renovations and redesign with minimal, if any, work being done to the exterior of the home. Most often such a project will include all the areas that make up the ?entertaining zones? of a house ? kitchen, dining room, living room, entry, hallway, and a powder room or washroom ? basically just the areas that guests would definitely see. Sometimes these projects also include the staircase, and depending on the scope of the space planning changes and original layout of the house, some slight modifications to the bedrooms may come about as well. More often than not, these projects involve structural work, plumbing, electrical, and tons of finishing work.

Usually when such a major project is undertaken, part of the purpose is to create a more open-concept space within the existing exterior walls. Although it is easy to presume that fewer walls equates to fewer costs, this is a major misconception when it comes to renovations, because there are many more issues that have to be addressed:

? Chances are that at least one wall to be removed is currently load bearing (structural). The load will have to be temporarily supported until the new permanent structural elements are properly in place. A consultant (structural engineer or similar) should be involved.

? In many municipalities, a permit is not required for a simple renovation, but the minute you start touching anything structural a permit becomes a mandatory acquisition and expense ? not to mention a potential delay if the application was not submitted early enough. Check with your municipality for specific details concerning timing, cost, necessity, and other pertinent information.

? When you demolish a wall, you are left with a damaged area of flooring which usually necessitates replacing the entire floor. On occasion you can get away with installing a coordinating or contrasting inlay of another flooring material, but this tends to cost in labour alone what a whole new installed floor would cost.

? Demolishing a wall also creates the need for repair on the ceiling and on any adjoining perpendicular walls. Although not an expensive fix, it is certainly costlier than just plastering a few nail holes or other imperfections.

? Electrical wiring, outlets and light switches all have to be rewired and relocated.

? Pipes, plumbing stacks, ventilation conduits, ducting, and the like, all have to be relocated to be concealed within floor/ceiling constructions and within walls that will remain.

As with any renovation project, labour accounts for approximately 30% of the total budget. Consultants? fees (designers, engineers, etc.) and contingencies (unforeseen circumstances) are both higher for this scope of work than for a simple renovation project.

What motivates homeowners to go to this extreme with interior redesign and renovations? There is actually no typical homeowner profile for projects of this scale. Sometimes a house has been purchased inexpensively and putting a large amount of money into renovations would still be within the purchaser?s budget and not bring the total too far over the market value. Other times a family has lived in the home for many years, the mortgage is either paid off or now quite low, and they just can?t imagine moving, so major renovations are the best solution to meet their changing needs. Sometimes such projects come about due to physical needs; major renovations are often required to make a home fully usable to someone in a wheelchair who wants to maintain their independence. It is also common that an older parent moves in with his/her adult child and their family ? in this case renovations would be done to facilitate both added privacy and improved family space. The reasoning behind investing so much into a home is completely based on personal and/or family-life lifestyles and dynamics, budget and finances, changing needs, a love of the home and its location, and so much more.

The implications of such a major redesign on a home vary as much as people?s reasons for taking on such projects in the first place. Depending on both the specifics of your project, and the community in which your home is located, the value of your home may increase by about as much as the budget of the project, or as little as about 25% of the value of the renovation. Property values could be discussed with a knowledgeable and experienced local real estate agent prior to commencing the project. It is important to remember which information the real estate agent can provide that is of value to you ? it is not in a real estate agent?s field of expertise to counsel you concerning wood species for cabinetry, and his/her personal opinions should be taken exactly as such. However, you will want to listen to his/her point-of-view concerning the benefits or negative implications of things such as creating a huge washroom vs. a walk-in closet for the master bedroom, or a home theater room vs. a larger kitchen with a cozier family room. But in the end, it is your needs from your home and space that should have the final word on how the project unfolds. Possible implications extend beyond resale value. Also on those lines though, are property taxes and ease of sell-ability. Even if you are increasing your home?s value by $75,000, there is a chance that it will take longer to find the right buyer should you ever decide to sell ? it is sometimes a bit of a challenge to sell a home priced significantly higher than others in a neighbourhood, no matter the justification for the price.

One implication of large-scale redesign projects, which has to be taken into account during the design phase, is temperature control. Especially if you are opening-up the floor plan, you will want to keep in mind that the walls you have now play a role in stopping cold air from the front door from blowing straight through to the back of your home. In summer months, the walls prevent hot sunlight from reaching areas from all sides. How sound travels through your home will also be affected with fewer walls present. Your requirements from your kitchen ventilation might also have to be reevaluated. If you have any young children, or pets, you may find it more difficult to restrict them from certain areas (such as the kitchen when the oven is hot) without walls or doorways. At the same time though, you will have better visibility of your home from almost any given area. Communication with a family member from the next room will be effortless. The sense of isolation that often comes with being in the kitchen to prepare a meal will be a thing of the past.

With little effort, you can prepare a list pages-long of the pros and cons of open concept floor plans, and major redesign projects in general. Everyone you speak to will have strong opinions about your project, its goals, and the alternatives available to you. Keep in mind that others? preferences do not affect how you and your family use your home; some of us function at our best with smaller but more numerous rooms, while others thrive in open space. The only way to ensure that a project of this scale will be all that you dream of and more, is to hire the proper professionals? interior designers, engineers, general contractors, or others, early enough in the planning phases. Before committing yourself to a contract with anyone whom you will have to work closely with, make sure that the right ?chemistry? exists between you ? your input and questions should be welcomed by them, and their responses and reactions to you should give you a sense of confidence.

Karen S. Weiner is the owner and principal interior designer of Idealspace Design in Montreal, Quebec (Canada). http://www.idealspacedesign.com

Building a concrete driveway is one of those rare options that can satisfy most people’s practical and aesthetic concerns. Concrete driveways are not only built to last long but are appealing to the eye at the same time. Granted, they may take a bit of time to build properly, because none of your efforts will feel wasted once you view your final product.

What Not to Forget When Building a Concrete Driveway

Building Codes in Your Area - It’s possible, especially if you’re living in the suburbs, or belong to a certain community, that driveway specifications may be subjected to certain community rules. Your village, for instance, may prefer for all houses to have similar looking driveways, regardless of the material used. Or, it’s the choice of material that’s subjected to certain restrictions. To avoid wasting time and money, do your homework and see if building a concrete driveway will result to any violation.

Put Your Plans in Paper - Before getting your still-unused carpentry and building tools and donning your DIY uniform, it’s best to put your plans on paper and try sketching the dimensions of your proposed concrete driveway. Make sure that you scale your drawing properly to gain accurate results, and most especially if you’ve decided not to hire an expert to help you out.

If you don’t know how to draw, please please please ask someone to do it for you. Don’t be stubborn like other homeowners who insist on doing everything themselves, never mind the consequences.

Submit the Necessary Requirements - Once you’ve become satisfied with the projected appearance of your concrete driveway, make time to submit the necessary requirements in order for the housing committee in your area to grant approval for your concrete driveway plans. It’s possible that they’ll be concerned with how your neighbors would feel once the noise of construction reaches their ears; to avoid any future altercations with your neighbors, make sure that you politely and nicely inform them of your plans. Gaining written permission from them won’t hurt either!

Going Shopping - With the legal stuff done, the next thing to do is what women love to do best: going shopping! If any woman in your household is a genuine shopaholic, she wouldn’t mind accompanying you in your buying quest, even if it’s just a trip to the local hardware store.

To save on time and money, make a list of the things you have to buy, compare product reviews, and see what brands are of superior quality but affordable at the same time. As for tools and other equipment, consider either buying them second hand, renting, or borrowing from your neighbors or friends.

Excavation and Base Preparation - The pre-construction stage is over, and it’s now time to do backbreaking stuff. First in the list is excavation and base preparation. Like most structures, excavating and preparing a base is required to give your concrete driveway a solid foundation. It’s best to take your time when doing this because one little mistake related to the foundation can cause the whole thing to collapse.

Building the Driveway - Once you’ve finished with the foundation, it’s now time to build the skeletal part of the driveway itself. Always consult your handmade blueprint while building the driveway to ensure that you’ve done everything correctly and according to the measurements you’ve specified.

Sealing it with a Concrete Kiss - Once you’re done with the frame, it’s now time to apply the concrete and wait for it to harden.

Finishing Touches - Backfill and provide enhancements for the landscape.

Pros and Cons of Using a Concrete Driveway Benefits - Concrete driveways can be decorated in various ways, making it more easy to use as a complement to the house itself. It is also easier to clean during winter. Concrete driveways can also be sealed right after installation. Cons - Concrete driveways, however, are more expensive than asphalt driveways and require a higher degree of care and maintenance. Lastly, concrete driveways cannot be relayered.

Choosing to build a concrete driveway is a good decision to make in most cases, but of course, it’s what the homeowner feels that counts the most. Just remember that when making a driveway, always choose a material that won’t crack under the weight of a ten-wheeler truck but enhance the appearance of your house as well!

Lee Dobbins writes for http://concrete.subjectmonster.com where you can learn more about the wonders of concrete.

Insulate Your Home With A Coat Of Paint!

Posted:23 September, 2008 by admin

What is the best material to use for heat and cold insulation in your home? The fact is that the material that the insulation is made from is not what provides the heat and cold barrier. It is the air that is trapped in the insulation that provides the thermal barrier that keeps you warmer in the winter and cooler in the summer. Each type of insulation, whether it is a foam product, fiberglass batts or shredded paper provides different sizes and numbers of air pockets within them. That is why crushing insulation or pushing insulation into a crevice is counterproductive, it removes the air pockets, which is what provides the thermal barrier.

Now you can paint and insulate at the same time!

A relatively new product to enter the market provides air pockets within paint. The principle of the product is based on a complex blend of microscopic hollow ceramic spheres. Each ceramic sphere has a vacuum inside it, similar to mini thermos bottles. By mixing the ceramic spheres into paint it creates a product that provides enhanced insulation and saves you energy and money.

The paint, with its ceramic additive has proven to increase the ?R? insulation level of walls and ceilings. While use of the product on interior walls is extremely beneficial, its use on exterior walls is even more dramatically effective since it blocks the extreme heat of the sun.

The ceramic materials have unique energy savings properties that reflect heat while dissipating it. The hollow ceramic microspheres reflective quality affects the warming phenomenon called Mean Radiant Temperature, where heat waves from a source such as direct sunlight cause a person to feel warmer even though the actual air temperature is no different between a shady and sunny location. It is the molecular friction within the skin caused by the sun’s radiant energy waves, which makes the mind think that the body is warmer. The ceramic microspheres in the paint refract, reflect, and dissipate heat.

The performance of the additive when mixed with light colored house paint can reduce exterior solar radiant heat gain into a home and interior heat loss from a home by over 20%. Summer heat gain through a building’s exterior walls can be reduced by over 20%. Winter heat loss through interior walls can drop to the point where a once chilly room is now a pleasantly comfortable one - making your home more comfortable in the winter, and summer!

The product is available as a premixed paint or it can be purchased as an additive.

For additional information on using insulating paint follow this link: Insulating Paint.

For additional information on other home renovation projects, visit Renovation Headquarters.

blogroll+